additionals

19-in-1 multi charge lead with 4mm connectors: one lead for almost every connector system.

LiPo tester 1S–8S with undervoltage alarm: checks your cells to an accuracy of ±0.01V and gives a loud warning with buzzer and red LED.

20 heat shrink tubing pieces 10 × 30mm in red and black: suitable for many connectors.

AOKoda AOK-041 – 1S tester for 2.50–4.35V: with connectors for JST, Molex, mCPX and MCX – ideal for whoop and micro batteries.

Mylipo/Bonka beach flag for your race track: flag approx. 3.0m high, with aluminium poles and ball-bearing ground spike.

Cobra Sticks stick ends Hybrid M4: grippy and beautifully made – for more precision on your transmitter.

Cobra Sticks stick ends Pincher M4: grippy and beautifully made – for more precision on your transmitter.

Cobra Sticks stick ends Ripper M4: grippy and beautifully made – for more precision on your transmitter.

Cobra Sticks stick ends Thumber M3: grippy and beautifully made – for more precision on your transmitter.

Cobra Sticks stick ends Thumber M4: grippy and beautifully made – for more precision on your transmitter.

Mylipo LiPo single cell 400mAh: 3.7V, approx. 8.2g, max. 2C (0.8A).

LiPo transport box 220 × 240 × 170mm: made of non-flammable material, suitable for several batteries – ideal for storage.

LiPo transport bag 185 × 75 × 60mm: made of non-flammable material, suitable for almost all 6S batteries.

LiPo safety bag 23 × 18cm: made of non-flammable material, suitable for almost all smaller batteries.

Mylipo anti-slip battery strap 20 × 330mm (standard): extremely strong, fully Kevlar-stitched, with a welded metal buckle – perfect for 600- and 700-size helis.

Peakeater BEC buffer capacitor 4700µF: simply plugs into a free servo port on the receiver and absorbs voltage drops.

Peakeater capacitor bank up to 6S with 4000µF: tested by Uli Westenfelder in the 1:8 GT class.

Peakeater capacitor bank up to 6S with 6000µF: black heat-shrink tubing, only 37g.

Peakeater capacitor bank up to 6S with 3000µF: compact at 40 × 15 × 25mm and only 22g.

Peakeater capacitor bank up to 3S with 9400µF: with Panasonic capacitors, e.g. for RC drag racing – only approx. 35g.

Peakeater capacitor bank for the Traxxas X-Maxx up to 8S: 8800µF with Rubycon capacitors and matching mounts.

Mylipo/Bonka race gate 175 × 260cm: with telescopic poles, ground spikes or bases, transport bag included.

SPEZILOVER Spezilicious – Meteor65 PRO Pusher Conversion Kit: the final version of the 65mm micro pusher whoop from the “German whoop-racing sensation” – exclusively at Mylipo.

Mylipo anti-slip battery strap 10 × 140mm (SLIM): extremely strong, fully Kevlar-stitched, with a welded metal buckle – perfect for mini FPV stacks 16 × 16mm.

Mylipo anti-slip battery strap 16 × 200mm (SLIM): extremely strong, fully Kevlar-stitched, with a welded metal buckle – perfect for mini FPV stacks 20 × 20mm.

Mylipo anti-slip battery strap 16 × 250mm (SLIM): extremely strong, fully Kevlar-stitched, with a welded metal buckle – perfect for mini FPV stacks 20 × 20mm.

Mylipo anti-slip battery strap 20 × 250mm (standard): extremely strong, fully Kevlar-stitched, with a welded metal buckle – perfect for FPV stacks 30.5 × 30.5mm.

MMW coreless motor “insane” 19000KV – set of 4 (2 CW + 2 CCW): pure madness for Inductrix and Nano QX – ride the fireball!

Carbon reinforcement cross for the original Inductrix frame: significantly better crash resistance at only 0.9g.

Mylipo LiPo single cell 550mAh: 3.7V, approx. 13.72g, 25C continuous discharge (13.75A).

Set of 5 – Mylipo 1S 305mAh – suitable for BetaFPV Meteor65: 3.8V, approx. 8.3g, 40C continuous discharge (12.2A), with BT2.0 connector.

Mylipo 1S 305mAh – suitable for BetaFPV Meteor65: 3.8V, approx. 8.3g, 40C continuous discharge (12.2A), with BT2.0 connector.

BT2.0 female with 180° cable exit (handmade): for very short, tidy wiring on the board.

BT2.0 female with lead: approx. 10cm AWG24 silicone wire.

JST PH1.25 female (2-pin) with lead: for mini helis such as the E-flite MSR and mCX.

JST-PH2.0 female with 180° cable exit (handmade): for very short, tidy wiring on the board.

JST-PH2.0 female with lead: e.g. for the Blade mCP X.

XT30 battery power lead: battery-side XT30 connector with approx. 65mm 16AWG wire.

8-in-1 multi charge lead with 4mm connectors: one lead for Uni, JST-BEC, XT60, Traxxas, Tamiya, Dean, EC3 and open end.