JUNSI/ICHARGER ICHARGER X12

SKU: iCharger X12

HAN: #612.

Category: JUNSI

preorder-item
Delivery status: on request

244,90 €

incl. 19% VAT ,

Manufacturers recommended retail price: 246,90 €

(Save 0.81%, i.e. 2,00 €)

iCharger X12 – pocket-sized 12S charger: 1100W, 1–12S, up to 30A charge current and 2A balance current – only 112 × 64 × 37mm.

Junsi iCharger X12 – charge 12S directly, in a tiny package

With the iCharger X12, Junsi presents a pocket-sized charger that is so far unique in its class: you can charge up to 12S directly. Despite its small dimensions, there are no compromises on power or handling.

1100W charging power (from 23.5V), 1–12S LiPo batteries and up to 30A charge current are enough even for large batteries. Of course you can also charge LiHV, Li-Ion, NiZn, Pb, NiCd and NiMH. The 2A balance current ensures perfectly matched cells.

The discharge power is 50W and can be increased to up to 1100W with an external load. Regenerative discharging into the supply battery is also possible.

Highlights

USB port and Micro-SD slot for data logging and updates

Specifications

Battery types	1–12S LiPo, 1–32 NiCd/NiMH cells, lead-acid batteries up to 40V
Charge current	max. 30A
Charging power	1100W (from 23.5V)
Discharge power	50W, up to 1100W with external load
Regenerative discharge	up to 30A
Balance current	2A
Input voltage	11–53V DC
Input current	max. 35A
Connectors	Input XT60, charge output XT60
Built-in power supply	no
Display	2.4" IPS
Dimensions	112 × 64 × 37mm

Charging 12S with two balance connectors (2 × 6S)

For 12S, your battery needs a 13-pin XH balance connector. To charge 2 × 6S as 12S, you also need the CB12-XH balance adapter board with the BW-13-13 cable (not included). For 10S as 2 × 5S, you can use the CB-1010 with the 11-11 cable.

First connect the charger to the power supply or supply battery. If you use a power supply, switch it on beforehand.
Plug the first balance connector (cells 1–6, negative side of the battery, black wire) into the matching 6S slot on the board – starting from the negative side.
Then plug the second balance connector (cells 6–12, positive side of the battery, red wire) into the second 6S slot – starting from the positive side.
Only connect the board to the charger once both batteries are correctly plugged into the board.
Finally, connect the thick red main charge lead (+) and then the thick black main charge lead (–) to the charger.

Avoid short circuits, otherwise there is a risk of injury. This sequence also applies when you charge several batteries in series. You are responsible for any damage caused by not following these instructions.

Good to know

All Junsi chargers in the X and DUO series are designed and approved for use in RC modelling. Industrial use is not intended and not permitted.
The menu navigation is almost identical to the well-known iCharger models 308DUO, 406DUO and 4010DUO.

Scope of delivery

iCharger X12
Mini-CD
2 × XT60 lead for self-assembly

Product safety

Warning and safety notice: CAUTION: Not suitable for children under 14 years of age. Use only under the direct supervision of adults.

Manufacturer: Shenzhen New Junsi Electronic Co.,Ltd (JUNSI), Room 208, Huaxuan Building Haibin Plaza, Ji, 518033 Futian, Shenzhen, China (CN), e-mail: szjunsi@163.com

Responsible person (EU): SieBra GmbH & Co. KG, Christian-Liebrecht-Straße 6, 58739 Wickede, Germany (DE), phone: +49 2307 146280, web: www.rc-dome.de, e-mail: info@rc-dome.de

There are no reviews yet.

Contact data

First name - optional

Last name - optional

E-Mail