JUNSI/ICHARGER ICHARGER DX12

SKU: ICharger DX12

HAN: #607

Category: JUNSI

preorder-item
Delivery status: on request

378,00 €

incl. 19% VAT ,

Manufacturers recommended retail price: 379,90 €

(Save 0.5%, i.e. 1,90 €)

iCharger DX12 – compact DUO charger for up to 12S: 1700W, up to 30A per output, 2A balance current per output – only 111.5 × 128.5 × 40mm.

Junsi iCharger DX12 – 12S in a compact format

With the iCharger DX12, Junsi presents a compact DUO charger that charges up to 12S. Despite its small dimensions, there are no compromises on power or handling – the newly developed rotary wheel has a very precise click.

1700W charging power (from 25V), 1–12S LiXx batteries and up to 30A charge current are enough even for large batteries. Of course you can also charge LiHV, Li-Ion, NiZn, Pb, NiCd and NiMH.

The discharge power is 80W in total (50W per output if only one is used) and can be increased to up to 3000W with an external load. Regenerative discharging into the supply battery is also possible.

Highlights

USB-C PD port for charging smartphones (5V/3A, 9V/2A, 12V/1.5A) and for software updates
Micro SD slot for data logging and updates
Integrated servo tester (external power supply required)
New rotary wheel with a very precise click point

Specifications

Outputs	2
Battery types	1–12S LiPo and LiHV, 1–32 NiCd/NiMH cells, lead-acid batteries up to 40V
Charge current	0.05–30A per output, 0.05–50A in synchronous mode
Charging power	1700W (from 25V), 1200W on one output
Discharge power	80W total without external load, 50W per output
External discharge	up to 3000W
Regenerative discharge	up to 30A
Balance current	2A per output, 4A in synchronous mode
Input voltage	11–53V DC
Input current	max. 65A
Connectors	Input XT90, charge output XT60
Built-in power supply	no
Display	2.8" IPS
Dimensions	111.5 × 128.5 × 40mm

Charging 12S with two balance connectors (2 × 6S)

For 12S, your battery needs a 13-pin XH balance connector. To charge 2 × 6S as 12S, you also need the CB12-XH balance adapter board with the BW-13-13 cable (not included). For 10S as 2 × 5S, you can use the CB-1010 with the 11-11 cable.

First connect the charger to the power supply or supply battery. If you use a power supply, switch it on beforehand.
Plug the first balance connector (cells 1–6, negative side of the battery, black wire) into the matching 6S slot on the board – starting from the negative side.
Then plug the second balance connector (cells 6–12, positive side of the battery, red wire) into the second 6S slot – starting from the positive side.
Only connect the board to the charger once both batteries are correctly plugged into the board.
Finally, connect the thick red main charge lead (+) and then the thick black main charge lead (–) to the charger.

Avoid short circuits, otherwise there is a risk of injury. This sequence also applies when you charge several batteries in series. You are responsible for any damage caused by not following these instructions.

Good to know

All Junsi chargers in the X and DUO series are designed and approved for use in RC modelling. Industrial use is not intended and not permitted.
Only operate the charger with power supplies designed for RC modelling. AGM batteries must not be charged using the Pb programme.
The menu navigation is almost identical to the well-known iCharger models 308DUO, 406DUO and 4010DUO.
The manual is supplied in English; a German version is available to download from our shop.

Scope of delivery

Only the device itself is supplied.

Product safety

Warning and safety notice: CAUTION: Not suitable for children under 14 years of age. Use only under the direct supervision of adults.

Manufacturer: Shenzhen New Junsi Electronic Co.,Ltd (JUNSI), Room 208, Huaxuan Building Haibin Plaza, Ji, 518033 Futian, Shenzhen, China (CN), e-mail: szjunsi@163.com

Responsible person (EU): SieBra GmbH & Co. KG, Christian-Liebrecht-Straße 6, 58739 Wickede, Germany (DE), phone: +49 2307 146280, web: www.rc-dome.de, e-mail: info@rc-dome.de

There are no reviews yet.

Contact data

First name - optional

Last name - optional

E-Mail

Manufacturer according to GPSR
Shenzhen New Junsi Electronic Co., Ltd, Room 208, Huaxuan Building, Haibin Plaza, 518033 Futian, Shenzhen, China, szjunsi@163.com
Responsible person according to GPSR
SieBra GmbH & Co. KG, Christian-Liebrecht-Straße 6, 58739 Wickede, Deutschland, info@rc-dome.de, https://www.rc-dome.de

Out of stock

Junsi/iCharger Balance Adapterboard XH-1 box

Junsi/iCharger Balance Adapterboard XH-12

Junsi/iCharger balance adapter board XH-12: for charging 2 × 6S as 12S, e.g. on the Junsi iCharger X12.

15,90 € *

preorder-item
Delivery status: immediately

Out of stock

JUNSI/ICHARGER CABLE ADAPTERBOARD 13-13

Junsi/iCharger cable 13-13 for the CB-12 board: 13-pin XH cable, 150mm – required to charge 2 × 6S as 12S on the iCha...

3,40 € *

preorder-item
Delivery status: immediately

pcs